Quick Summary
A garage door spring repair in 2026 typically costs between $150 and $350, with a national average near $250, though a pair of torsion springs can run from $145 to $520. Most all-in repairs fall between $150 and $600, and a written quote should list parts, labor and any service call fee.
- Service call fees usually run $75 to $150 before any repair work begins.
- Labor runs $75 to $150 per hour, with most single-spring repairs taking one to two hours.
- Standard springs are rated for about 10,000 cycles, while high-cycle springs last 25,000 to 50,000 or more.
- Ask whether a quote covers both springs, since the partner spring is often near the end of its life.
- Request the cycle rating and wire size in writing to avoid being quoted a shorter-lived part.
Table of Contents
- What a Garage Door Spring Repair Costs in 2026
- Garage Door Spring Replacement Labor Cost and Parts Breakdown
- Torsion Spring Replacement Cost and How Long Springs Last
- Booking Your Spring Replacement With Performance Building Products, Inc.
- Frequently Asked Questions
What a Garage Door Spring Repair Costs in 2026
Last Updated: November 15, 2026
Most homeowners paying for a broken garage door spring in 2026 should expect a national average of about $250, according to Angi’s 2026 national average pricing for residential spring replacement. Most quotes land between $150 and $350, though a pair of torsion springs installed can run from $145 to $520 depending on the door and region, per GarageDoorSpringReplacementCost.com’s 2026 market estimate. Performance Building Products, Inc. recommends getting a written quote that lists parts, labor and any service call fee before work begins.
Those ranges look wide because price depends on what broke and what the door needs. Service call fees usually run $75 to $150, and most all-in repairs fall between $150 and $600, based on Garage Door Science’s 2026 cost data. A $400 quote for a broken spring is within that range, so it is not automatically a sign of overcharging. Ask whether the price covers both springs, since a broken spring often means the partner spring is near the end of its life.
Garage Door Spring Replacement Labor Cost and Parts Breakdown
Labor usually runs $75 to $150 per hour, according to OHDNY’s 2026 service rate benchmarks. Most single-spring repairs bill one to two hours, so the labor line lands between $75 and $300 before parts. A pair of torsion springs on a heavier door can push labor toward the top of that band because the technician must unwind both springs, reset the cables and rebalance the door.

Parts vary with spring type and door weight. Torsion springs generally cost more than extension springs and need more careful handling. Extension springs are often sold and replaced in pairs. Cables, drums, bearings and end plates are sometimes replaced at the same time.
| Cost Component | Typical Range (USD) | What It Covers |
|---|---|---|
| Service call fee | $75 to $150 | Technician dispatch and initial assessment |
| Labor | $75 to $150 per hour (1-2 hours typical) | Removal, installation, cable reset, balance test |
| Torsion spring parts | $40 to $100 each; $80 to $200 per pair | Springs sized to door weight and height |
| Extension spring parts | $20 to $60 each | Springs, safety cables, attachment hardware |
| Related hardware | $15 to $60 per item | Cables, drums, bearings, end plates |
Ask for a written quote that separates the service call fee, labor hours, spring parts and any related hardware. A bundled number makes it hard to tell whether you are paying for a second spring, a high-cycle upgrade or unneeded hardware. Performance Building Products, Inc. recommends confirming in writing whether the price covers one spring or a pair before work begins.
Watch out: a low quote that excludes the service fee or the second spring can cost more once the technician arrives, and a quote that lists only “springs” without a cycle rating or wire size may be substituting a lighter, shorter-lived part than the one that failed.
Torsion Spring Replacement Cost and How Long Springs Last
Standard springs are rated for about 10,000 cycles, while high-cycle springs are rated for 25,000 to 50,000 or more, per MyHomeScore’s 2026 spring lifespan specifications. A cycle is one full open-and-close, so a household that runs the door four times a day uses about 1,460 cycles a year. At that pace a 10,000-cycle spring lasts roughly six to seven years, a 25,000-cycle spring about 17 years and a 50,000-cycle spring roughly 34 years. That math is the single most useful number in this article, because it turns a vague “springs wear out” warning into a replacement timeline you can plan around.
Pricing for a pair of torsion springs typically runs from $145 to $520. High-cycle springs sit at the upper end, often $50 to $150 more per pair, but the upgrade can outlast a standard spring several times over, which is why many technicians recommend it on doors that get heavy daily use. A study modeling about 26,500 annual spring replacement events by American Small Business Research’s analysis of spring cycle life supports planning replacements around cycle ratings rather than waiting for failure.
Knowing which spring you have matters before you call for a quote. Torsion springs mount horizontally on a shaft above the door and are wound tight; extension springs run along the horizontal tracks on each side and stretch rather than twist. Torsion springs are the more common setup on newer doors and generally the more expensive repair, while extension springs are cheaper per part but require safety cables running through the center of each spring. If unsure, describe the hardware above the door when you call, a photo of the spring and its color-coded end is usually enough for an accurate quote.
Watch out: a quote that prices a “spring replacement” without stating the cycle rating, wire size or whether it covers one spring or a pair can hide a downgrade to a shorter-lived part, ask for those three details in writing before you approve the work.
Booking Your Spring Replacement With Performance Building Products, Inc.
Performance Building Products, Inc. sells, installs and services garage doors and openers for homeowners and contractors. Pricing depends on door size, spring type and site conditions, so the most accurate figure comes from a written quote. Visit the Performance Building Products, Inc. website to request one.
Frequently Asked Questions
How much should I pay to have a garage door spring replaced?
Quotes vary with door weight, spring type and whether both springs are replaced, so compare an itemized estimate before agreeing to work. For current pricing on Performance Building Products, Inc. services, contact the company directly for a quote.
Is it worth fixing a garage door spring?
In most cases, yes. A broken spring is usually far cheaper to repair than replacing the whole door, and the rest of the door often remains sound. Spring replacement should be done by a trained technician, because torsion springs store high tension and can cause serious injury if handled improperly. If the door itself is damaged, bent tracks or failing panels may change the math, so ask for a quote on both options.
What is the life expectancy of a garage door spring?
Garage door springs are rated by cycle count, where one cycle is one full open and close. High-cycle springs are generally designed for longer service life than standard springs. Spring replacement is often more economical when both springs are the same age, since they wear at similar rates. Ask your installer which cycle rating they are quoting.
Recent Comments